Assisted Steering System

FieldPilot 220 is an innovative GPS guidance device that provides effective results in an easy-to-use package at an unbeatable price.  The FieldPilot 220 system is an extension of the familiar CenterLine 220 console, which is easy to use and familiar.  Guidance information is provided on a bright, clear graphical display and also on a built-in lightbar. The system will provide manual or automated guidance in parallel (straight) and curved AB patterns.

The simplicity and value that make CenterLine 220 manual guidance so appealing are now available in an assisted steering package that’s ready to make a difference in your operation.

FieldPilot 220 connects to the hydraulic power steering system to provide reliable and convenient control. This method of connection keeps the cab free of brackets and motors that may interfere with normal steering.

During operation, the first pass in a field is driven manually.  Subsequent passes are conducted by lining up the vehicle near the desired swath and engaging assisted steering.  The vehicle will automatically maintain its precise location on the desired track.  At the row end, the operator can easily disengage the steering system and make the headland turn manually.

• Low cost assisted steering
• Simple installation and operation
• Sub-meter WAAS/EGNOS GPS receiver built-in
• Hydraulic steering interface for optimum performance
• Small console size keeps cab free of clutter
• Parallel (straight) and curved A-B guidance
• Tilt compensation and Gyro-stabilization included standard
• Remote engage/disengage switch
• Custom installation kits available to fit most common vehicles

FieldPilot 220 Display

FieldPilot 220 is extremely easy to set up and operate. Intuitive graphical screens guide the operator through the settings to configure the system and fine-tune performance.

FieldPilot 220 Kits for Hydraulic Steer Vehicles

Notes:
  1    Accusteer models not compatible with FieldPilot
  2    TLS front suspension requires longer hoses (not provided)
  3    Not suitable for machines equipped with ESP
  4    4-wheel models only
  5    Does not include T series
  6    Serial number tag will show model 778C for 4260
  7    Does not include models with front axle suspension
  8    Does not include models with 120 foot booms
  9    Must use FieldPilot valve (not AutoTrac valve)
10    Not compatible with Row Crop Special
11    Cummins engine / Eaton Fuller transmission
12    Flat-face O-Ring hydraulic fittings at steering orbital
13    Snap-to-Connect hydraulic fittings at steering orbital
14    Open Center Steering circuit models only.  Identified by 4 hoses at the orbital valve
15    M95X & M105X with front-end loader will require relocation of FieldPilot valve
16    For machines with Load Sensing Orbital and Priority valve only. 
        Identified by 5 hoses at the orbital valve.
17    Not recommended for operation above 7 mph


While TeeJet Technologies takes all reasonable care in assembling the information included in this Vehicle Kit List, due to influences outside of its control TeeJet Technologies makes no guarantees as to the compatibility of these Vehicle Kits to the vehicles listed.

Specifications and availability subject to change without notice.