TeeJet - Legacy® 6000 Roadway Management System

Legacy® 6000 Roadway Management System

RMS CAN for Legacy 6000

RMS CAN for Legacy 6000 is a self contained, multiple product control system with dedicated software specifically for roadside application of sprayed chemicals. One Legacy 6000 console provides the operator with the tool needed to control the entire spraying operation.

Features

Automatic rate control based on vehicle speed.
Legacy 6000 controls up to six products at the same time.
Direct chemical injection control is available.
Real time display of application rates.
Tell the Legacy 6000 the angle of the incline or decline that you are spraying and it will adjust the flow rates automatically to account for the change in effective swath width.
View background maps during a spraying session.
Hand gun mode is available.
Display and record vital spraying session data.
Print spray session reports to meet customer or agency record keeping requirements.
View "on-screen" boom status of active and inactive boom sections.
View "on-screen" product and boom spray activity while spraying.
Legacy 6000 will warn you of pre-mapped hazards and areas that are not to be sprayed.
Easy to understand "Soft Key" button symbols for simple operation.
On board "Help" screen.
On screen "message banner" for operational feedback information and warning messages.
Map objects and add weather information during the spraying session.

	Part Number	Description
Console Kits	90-02369	Legacy 6000 RMS Kit, Basic
Boom Switchboxes and Input Status Modules	45-07602	ISM, 10 Boom
	45-07601	ISM, 29 Boom
	78-30009	Boom Switchbox, Booms 1-5
	78-30004	Boom Switchbox, Booms 1-10
	78-30005	Boom Switchbox, Booms 11-20
Product Switchboxes	78-30008	Product Switchbox, Product 1-4
Product Switchboxes	78-30003	Product Switchbox, Product 1-8
Switch Function Module	78-08027	SFM, Booms 1-10
	78-08035	SFM, Booms 11-20
	45-05302	SFM Power Cable (one required per SFM)
DCM and Power/ Speed Harness	78-08050	DCM with RMS
DCM and Power/ Speed Harness	45-07500	DCM Harness with CAN, Power and Speed Connections (one required per DCM)
DCM Application Control Harness (one required per product)	45-06503	DCM Product Harness, Injection Pump Drive + Flow Monitor Input (Sensor D - Sensor A Used by Pump)
	45-06516	DCM Product Harness, Servo Valve + Two Frequency Type Sensor and One Analog Sensor Input (Sensors A/D/E)
	45-06517	DCM Product Harness, Injection Pump Drive, Flow Monitor Input and Agitation Output (Sensor D - Sensor A Used by Pump)
Handgun Components	120-0004	Flow Switch, NO, 1-1/2 gpm
	120-0005	Flow Switch, NO, 1/2 gpm
	402-0009	Cable, 18', Handgun Flow Switch
CAN Extension Cables	45-08106	6' (1.8 m) CAN Extension Cable
	45-08112	12' (3.7 m) CAN Extension Cable
	45-08117	20' (6.1 m) CAN Extension Cable
	45-08118	30' (9.1 m) CAN Extension Cable
Power Cables (standard 2 position weatherpack)	401-0016	Battery Cable, 2' (0.6 m), 1 Lead
	45-05037	Battery Cable, 2' (0.6 m), 2 Lead
	401-0011	Battery Cable, 2' (0.6 m), 3 Lead
	45-05381	Battery Cable, 12' (3.7 m), 3 Lead with Fuses
	45-05160	10' (3.0 m) Power Extension Cable, Fused
	45-05161	20' (6.1 m) Power Extension Cable, Fused
	45-05162	30' (9.1 m) Power Extension Cable, Fused
RMS Office Software	90-02377	RMS Office Software CD and Manual

Legacy 6000 RMS-EXT System

Features

Uses a Legacy console for mapping and data collection while connected to a Mid-Tech TASC controller that handles the application rate control.

	Part Number	Description
Console Kits	90-02369	Legacy 6000 RMS Kit, Basic
Power Cables (standard 2 position weatherpack)	401-0016	Battery Cable, 2' (0.6 m), 1 Lead
	45-05037	Battery Cable, 2' (0.6 m), 2 Lead
	401-0011	Battery Cable, 2' (0.6 m), 3 Lead
	45-05381	Battery Cable, 12' (3.7 m), 3 Lead with Fuses
	45-05160	10' (3.0 m) Power Extension Cable, Fused
	45-05161	20' (6.1 m) Power Extension Cable, Fused
	45-05162	30' (9.1 m) Power Extension Cable, Fused
RMS Office Software	90-02377	RMS Office Software Kit
Controller Interfaces and Cables	78-05007	Datalink for Mid-Tech TASC controllers, V5.0